Network Configuration

Network Configuration#

Dynamic IP Address Configuration#

1.Restore WiFi module default settings#

../../media/AT2BRESTORE.png

Restore WiFi module default settings#

2.Set static IP mode#

../../media/AT2BDHCP3D1.png

Set static IP mode#

3.Restart Scanner#

../../media/24POWER23OFF.png

Restart Scanner#

4.Configure transmission scheme#

  • After configuring the network parameters, select the transmission method below to configure

  1. Using TCP Server to Transmit Data

  2. Using TCP Server to Transmit Data

  3. Use MQTT protocol to transmit data

  4. Use HTTP protocol to transfer data

Static IP Address Configuration#

1.Restore WiFi module default settings#

../../media/AT2BRESTORE.png

Restore WiFi module default settings#

2.Set static IP mode#

../../media/AT2BDHCP3D0.png

Set static IP mode#

3.Restart Scanner#

../../media/24POWER23OFF.png

Restart Scanner#

4.Set IP address#

   

5.Setting the Gateway#

   

6.Set the subnet mask#

   

7.Configure transmission scheme#

  • After configuring the network parameters, select the transmission method below to configure

  1. Using TCP Server to Transmit Data

  2. Using TCP Server to Transmit Data

  3. Use MQTT protocol to transmit data

  4. Use HTTP protocol to transfer data

Contents